Hydrovane compressors in GA are reliable, versatile, powerful and cost-effective. They can be found throughout all industries, including automotive, food and beverage, energy, and manufacturing with specialist solutions within transit, gas, and snow.
In fact, they are the perfect solution to meet your requirements for reliable, high-quality compressed air or gas. With its low noise level, the Hydrovane compressor can be installed right alongside your equipment.
Today we’re answering the most commonly asked questions we receive regarding Hydrovane compressors in GA.
Why should I buy a Vane compressor?
The vane compressor is a long-term investment, not a short-term purchase. It will provide high-quality, pulse-free air reliably and efficiently and can last up to three times longer than other technologies.
How long does a Hydrovane compressor last?
When installed and maintained properly, the Hydrovane compressor can last for as long as you want it to without replacements of any major components. In fact, 100,000 hours is not uncommon.
How often do the blades need to be replaced?
The rotor blades and stator are all manufactured using high-quality cast iron. Through the life of the compressor the mating surfaces become highly polished and the compressor even becomes more efficient. The blades should never need to be replaced.
How efficient are Hydrovane compressors in GA?
Their performance is comparable with any alternative compression method. Most of the range include REVS (Reduced Energy Venting System), which offers energy savings off-load and during start-up.
How reliable are they?
These compressors are directly driven at low speed with minimal internal stresses, which means that with correct maintenance the compressor can run trouble-free without affecting your productivity and profitability.
Is it easy to install a Hydrovane compressor?
Most Hydrovane compressors are designed to be easily transportable with a forklift or pallet truck and fit through a standard doorway. The services are located to enable quick and easy electrical connection and pipework.
How easy is it to service a Hydrovane compressor?
The general service requires only changing the oil, air and oil filters at 2000 hours. A range of ready-made kits containing genuine Hydrovane parts is always available.
How long do the bearings last on Hydrovane compressors in GA?
Hydrovane compressors use bushes so there are no bearings to wear out. The metal bushes are pressure-lubricated and designed to last the life of the compressor.
Do Hydrovane compressors have a good resale value?
Hydrovane compressors are one of the few pieces of equipment that actually improve in performance with age! That’s why they have high residual value. Many people see them as not just a purchase, but more of a capital investment with low maintenance costs.
How safe are they to operate?
All Hydrovane compressors conform to EEC safety regulations. They contain cut off thermistors to prevent the compressor from overheating and are thoroughly tested before leaving the factory.
How noisy are Hydrovane compressors in GA?
The Hydrovane compressor generates high-quality, pulse-free air, which means that it is one of the quietest on the market.
For more detailed information regarding Hydrovane compressors in GA and to get professional advice on choosing the right type to suit your needs, please call our office today to speak with one of our experts.
Keep in mind that we also specialize in a variety of advisory and installation services, all designed to help you get the most out of your liquid-handling equipment.
